OVERVIEW
The ONV-IoT7000-UPS220-DG is a backup power that is specially used for supporting intelligent O&M boxes independently developed and produced by ONV. The backup power adopts a DIN-rail structure and can be directly installed in the security monitoring box, power control box, traffic control box, control cabinet, and light pole control box. The backup power can provide backup power output for operation and maintenance terminals, Ethernet switches, and ONU after the mains is interrupted. Provide DC12V and AC220V two kinds of backup power output, which can meet the needs of various AC and DC power supply operation and maintenance terminals and Ethernet switches. The ONV-IoT7000-UPS220-DG backup power uses supercapacitors as energy storage elements, which has the advantages of long cycle life (theoretical charge and discharge cycles of 500,000) and wide operating temperature. It can automatically switch to the built-in UPS power supply at the moment of power failure to ensure that the equipment sends the power failure information back to the monitoring center in time.
FEATURE
◇ Provide DC12V and AC220V two kinds of backup power output to meet the power supply needs of various terminals.
◇ Optimum design of long-life supercapacitor, no need to replace the battery.
◇ The built-in intelligent balance protection circuit supports output overload, overvoltage, and short circuit protection to ensure high reliability.
◇ Support 1*power failure alarm signal interface.
◇ Aluminum alloy shell, superheat dissipation, sturdiness, and durability.
◇ Support DIN-rail, wall-mounted installation, IP40 protection level.
DIMENSION
PACKING LIST
|
PACKING LIST |
CONTENT |
QTY |
UNIT |
|
Backup power |
1 |
SET |
|
|
User guide |
1 |
PC |
|
|
Warranty card |
1 |
PC |
TECHNICAL SPECIFICATION
|
Model |
ONV-IoT7000-UPS220-DG |
|
Power Input |
|
|
AC220V |
1*AC220V input, 3P industrial terminal connection. Input voltage range: 90-264VAC,47-63Hz Rated input voltage: 100-240VAC,50-60Hz |
|
Power Output |
|
|
AC220V |
1*AC220V/5A output, max load is 1100W, 2P industrial terminal connection. |
|
UPS Backup Power |
1*DC12V&AC220V UPS backup power output (backup duration 5S), max load 45W, 3P industrial terminal connection. |
|
DC12V |
1*12V/5A output, max load is 70W, 2P terminal connection |
|
Power Failure Alarm |
1*Alarm signal output port (Normally low-level 0.3VDC, power failure high-level ≥3.3V) |
|
Physical Parameter |
|
|
Operation TEMP / Humidity |
-40~+70°C, 5%~90% RH Non condensing |
|
Storage TEMP / Humidity |
-40~+85°C, 5%~95% RH Non condensing |
|
MTBF |
>100,000 hours |
|
Dimension (L*W*H) |
121*102*56mm |
|
Net /Gross Weight |
<0.7kg / <0.9kg |
|
Installation |
Wall-mounted, DIN-rail |
|
Certification & Warranty |
|
|
Lightning Protection |
Lightning protection: 6KV 8/20us; Protection level: IP40 |
|
Certification |
CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS |
|
Warranty |
5 years, lifelong maintenance. |
